光電參數Photoelectricity Parameter (環境溫度Ambient temperature:25℃ 濕度humidity:RH60%)
項目 Item | 符號Symbol | 測試條件 Test condition | 最小值 Min | 典型值 Type | 最大值 Max | 單位 Unit |
正向電壓 Forward voltage | VF | IF=60mA | 3.0 | -- | 3.2 | V |
反向電流 Reverse current | IR | VR=10V | -- | -- | 1 | μA |
發光強度 Luminous intensity | IV | IF=60mA | 24 | -- | 26 | lm |
色溫 Color Temperature | CCT | IF=60mA | 6000 | -- | 6500 | K |
显色指数 Color Rendering Index | CRI | IF=60mA | -- | 90 | Ra | |
光譜半寬度 Spectrum line half width | Δλ | IF=60mA | 60 | -- | 70 | nm |
視 角 Viewing Angle | 2θ1/2 | IF=60mA | 120 | -- | 140 | deg |
備註:亮度測試公差±15%、波長測試公差±1nm、正向電壓測試公差±0.05V Remark:The tolerance of intensity:±15%, The tolerance of wave length:±1nm,The tolerance of forwards voltage: ±0.05V. Only reference for above data when testing.
三、極限參數Absolute Maximum Rating (環境溫度Ambient temperature:25℃ 濕度humidity:RH60%)
項 目 Item
| 符號 Symbol | 數值 Value | 單位 Unit | 備註 Remark |
正向電流 Forward Current
| IF | 60 | mA | --- |
正向峰值電流 Peck forward current | IFM | 75 | mA | F=1KHZ,占空比(duty cycle)1/10 |
反向耐壓 Reverse Voltage | VR | 10 | V | --- |
耗散功率 Power Dissipation | Pm | 180 | mW | --- |
工作環境溫度Operation temperature | Tamb | -25至+80 | ℃ | --- |
貯藏溫度 Storage temperature | Tstg | -40至+80 | ℃ | --- |
焊接溫度 Soldering temperature | Tsol | 240 | ℃ | 焊接≤3S Soldering≤3S
|
● 可靠性實驗項目Reliability Test Project
●
描述 Description | 項目 Item | 測試標準 Test criterion | 測試條件 Test condition | 測試時間 Test time | 數量 Qty | 失效數量 Fail qty |
壽命測試 Life test | 常溫壽命測試 Life test(room temperature) | JIS7021:B4 | Ta=25℃±5℃,IF=60mA | 1000Hrs | 22 | 0 |
環境測試 Ambience test | 高溫存儲 High temperature store | JIS7021:B10 MIL-STD-202:210A MIL-STD-750:2031 | Ta=85℃±5℃ | 1000Hrs | 22 | 0 |
低溫存儲 Low temperature store | JIS7021:B12 | Ta= -35℃±5℃ | 1000Hrs | 22 | 0 | |
高溫高濕測試 High temperature/ humidity test | JIS7021:B11 MIL-STD-202:103D | Ta=85℃±5℃ RH=85% | 1000Hrs | 22 | 0 | |
冷熱衝擊測試 Cold / Heat strike test | JIS7021::B4 MIL-STD-202:107D MIL-STD-750:1026 | 30min -10℃±5℃←→100℃±5℃ 5min 5min | 50Cycles | 22 | 0 | |
冷熱迴圈測試 Cold and heat cycle test | JIS7021:A3 MIL-STD-202:107D MIL-STD-705:105E | 5min 5min 5min -35℃~25℃~85℃~-35℃ 30min 5min 30min 5min | 50Cycles | 22 | 0 |